Shunyata Research Sigma-X NR Power Cable



Pin It
  • The most radical progression in power cord design since Shunyata Research’s humble beginnings in 1998, has delivered a watershed level of performance with the introduction of the SIGMA-X power cables.

    Inspired by our well documented success in medical imaging and recording industries, Shunyata Research has continued to advance the science and technology of its most successful products. The SIGMA-X power cables have exceeded even the highest performance expectations.

    The SIGMA-X is second only to Shunyata Research’s ultimate Omega power cord within the “Reference Series”. The Reference Series X cables represent the culmination of a 25-year commitment to produce the absolute finest performing power cables available.

    There are three definable advances to the Sigma X power cord designs that will distinguish themselves within seconds after application, comparisons and testing.

    TAPc Technology

    The SIGMA-X features the all-new TAPc technology. TAP (transverse axial polarizer) is a patent pending technology that Shunyata Research developed to improve the performance of its reference signal cables. The TAPc technology is a radical advancement of the TAP technology that enables a significant reduction in the size of the modules – and for the first time allows this technology to be applied to power cords.

    The sonic results of TAPc include a cavernous drop in perceived noise floor, effortlessly portrayed dynamics and a superb rendering of timing and coherency. The sonic benefits of the TAPc technology are quite simply unique and cannot be replicated by any competing product or technology.

    Even to an untrained ear, the effects of the TAPc are immediately apparent and repeatable across a variety of components and systems. In essence, the TAPc modules are force-multipliers that elevate the listening experience to a level many would not imagine possible.

    Patented QR/BB Technology

    True to its reputation for migrating its most profound patented technologies into more affordable products, Shunyata Research has done it again. Previously found only in the ultimate Omega power cords, the QR/BB module takes a wrecking ball to power cord performance expectations.

    The SIGMA-X QR creates an island of pure silence when used with reference quality amplifiers and source components. The QR/BB technology essentially supercharges the component’s power supply with reserve levels of DTCD energy.

    For the first time, this remarkable QR/BB technology is available at a much lower price in order to reach far wider audience.

    NR – 3rd Generation Noise Reduction Circuit

    Perhaps no technology has been more thoroughly researched, measured and third-party tested than Shunyata Research’s power line noise reduction technology. Gen-2 NR technology, as used in the Gamma and Theta power cord lines, has been proven effective in heart surgery labs across the U.S. and Europe. Countless iconic recording engineers, mastering studios and musicians have provided vivid accounts supporting the efficacy of Shunyata Research’s NR power cords.

    The Gen-3 NR circuit, as used in the ALPHA-X and SIGMA-X power cords, improves upon the sonic performance of the Gen-2 circuit. Transient speed, transparency and purity are all significantly improved along with an improvement in micro-dynamics. The new NR circuit is also more compatible across a broader spectrum of electronic component types; including preamplifiers and power amplifiers. Even amplifiers operating in pure Class A will realize a significant benefit when using the SIGMA-X NR power cable.

    (The SIGMA-X XC power cords are now, primarily, recommended for use with power distributors.)

    KPIPv2 – Kinetic Phase Inversion Process

    Shunyata Research’s update to its proprietary KPIP processor represents a significant advancement to a process that permanently preconditions cables and power distributors. It dramatically enhances the sonic performance of the cables to which it is applied and significantly shortens the break-in cycle. All cables, conductors, connectors and outlets undergo a multi-day conditioning process that is an integral aspect to the extraordinary performance of Shunyata Research products.

    Three Distinct Models to choose from:

    SIGMA-X QR
    The SIGMA-X QR edition is the highest performing SIGMA-X model. It includes patented QR/BB technology descended from the ultimate OMEGA QR along with NR noise reduction technology. It is particularly suited to use with high powered amplifiers but can be used for source and digital equipment when only the highest levels of performance are demanded.

    SIGMA-X NR
    The SIGMA-X NR delivers reference-grade performance and noise reduction on any and all electronics. Whether on amplifiers, sources or line-level components the SIGMA-X NR offers a massive component-upgrade level of performance.

    SIGMA-X XC
    SIGMA-X XC was designed specifically for use as a wall-connection power cord for use with Shunyata Research power distributors. Due to the extensive levels of filtering in Shunyata Research designed power distributors, NR filters are not needed at the wall connection. For use with other manufacturers power conditioners, the NR models will likely provide a performance benefit.

    Bringing it Home

    Have you ever watched a film that was so engrossing and captivating; the performances so real that you forgot you were watching a movie? That would be an apt description of the SIGMA-X power cord’s impact on sound, recording and imaging. There is an immediacy to sound, an immersive rendering of recorded detail that makes it easy to focus on the music and to forget about the recording chain.

    The dramatic performance SIGMA-X power cords impart is not subtle or amorphous, it is revelatory and impossible to dismiss. When the recording calls for it, SIGMA-X power cords unleash a perfectly timed storm of three-dimensional weight and dynamic intensity – without a hint of compression or artifice. Perhaps the signature attribute of the SIGMA-X performance is its rendering of an almost gravitational silence within voice, instruments and images on a recording. There is a truth and precision to sound that is unmistakably free of distortion, leaving the listener captivated by an intense connection to favorite music.

    TECHNOLOGY - NR NOISE REDUCTION

    Shunyata Research’s exclusive NR (Noise Reduction) technology is a multi-stage filter network that measurably reduces power-line and component-generated noise, producing better purity of tone and clarity. It delivers a stunning background of silence to recordings, allowing the listener to hear into recordings as never before.  Every nuance of meaningful content is revealed, bringing to life music’s most consequential moments as if the performers are in the room with the listener.

    VTX-Ag CONDUCTORS

    Shunyata's VTX-Ag conductors are the product of a 25-year design progression steeped in credible science and definitive measurement.

    VTX-Ag conductors use an outer tube geometry of the purest form of copper, intended to bring out the purest tone and timbres of recorded instruments and voice.  This VTX outer core of pure copper surrounds an inner core of the purest form of silver.  This inner Ag core demonstrably improves macro-dynamics and creates an incredible three dimensional weight and timing in the lower octaves.

    OFE Alloy 101

    Shunyata Research uses only the highest purity of copper available for the production of its wire products.  OFE Alloy 101 or C10100 is the highest grade of copper with a minimum 99.99% purity and a conductivity rating of 101% IACS. OFE stands for oxygen-free electrolytic and supersedes the term OFHC (oxygen-free high conductivity).  C10100 is the only grade of copper that comes with a written certification of purity.

    Certified by ASTM F68 C10100

    Fluorocarbon dielectrics are usually only found in wire used in the aerospace industry, satellites and only the most expensive audiophile cabling. It has special electrical characteristics; very low dielectric absorption, high dielectric strength and exceptional heat resistance.  When used in audio and power cables is reduces the perception of dynamic compression and it improves sonic low-level resolution and clarity.

    Crystal clear transient detail.

    Many audiophile grade connectors are made from brass or bronze. While some may get a plating of silver, gold or rhodium, the majority of the current is carried by the contact’s base-metal. ‌CopperCONN® connectors contain pure copper contacts which have a much higher conductivity than brass. The difference in performance is clearly audible.

    KPIP v2™ PROCESSING

    Shunyata Research’s proprietary Kinetic Phase Inversion Process includes four days of continuous KPIP v2™ processing which refines conductor metals at a molecular level. This dramatically reduces burn-in time and significantly improves sonic performance, delivering a relaxed and life-like presentation. When compared to the original process, KPIP v2™ represents a dramatic performance upgrade on par with a component-level upgrade.

  • SPECIFICATIONS:

    Conductors: VTX-Ag

    Gauge: 06

    Construction: 1″ tube

    Dielectric: Fluorocarbon

    Noise Reduction:
    QR Model: > 6 dB @ 1 MHz
    NR Model: > 6 dB @ 1 MHz
    XC Model: None

    Tech:
    QR Model: QRBB, NIC, TAPc Polarizer 2x
    NR Model: TAPc Polarizer 2x
    XC Model: TAPc Polarizer 2x

    AC Connector: CopperCONN™ Carbon-Fiber

    IEC Connector: CopperCONN™ Carbon-Fiber

    KPIP v2 Processing: 4-days

    Color: Black flex

    Standard Length: 1.75 meters

    Safety Assurance:
    Continuity and polarity tests – by two technicians
    HiPOT tests insulation breakdown @ 4,500 VAC

Related Items